![]() The clock will then automatically attempt to receive the WWVB time from 12:00 am through 6:00 am each day (attempts WWVB reception every full hour within this time frame). ![]() If after 10 minutes the WWVB time has not been received, use the SET key to manually enter the set mode and change either the time or date in order to activate the WWVB reception (see manual settings below). This reception typically takes between 5-10 minutes in good conditions. After the clock receives the outdoor temperature the WWVB time code reception will automatically start. The default time zone is Eastern Standard Time.ħ. After the clock receives the outdoor temperature, set your time zone using the manual settings below. Remove the batteries and wait for at least 30 seconds before reinserting them.Ħ. IMPORTANT: if this does not happen after 4 minutes, the batteries will need to be removed from both units and reset from step 1. The remote temperature will then be displayed on the SkyScan Atomic Clock. After a few seconds of inserting the batteries into the transmitter, the Atomic Clock will start receiving data from the transmitter. Within 2 minutes of activating the SkyScan Atomic Clock, place the batteries into the transmitter (see “To install and replace batteries in the Temperature Transmitter” above).ĥ. IMPORTANT: If the indoor temperature is not displayed after a few seconds, remove the batteries and wait for at least 10 seconds before reinserting them.Ĥ. Then the indoor temperature, the time as -:-, the date as 1.1. ![]() Once the batteries are in place, all segments of the LCD will light up briefly. Checking the correct polarization, insert 2 x AA, 1.5V batteries into the battery compartment and replace the battery cover.ģ. Slide the battery cover open on the SkyScan Atomic Clock as indicated above (see " To install and replace batteries in the Atomic Clock“ above).Ģ. SETTING UP: Do not set the clock until the outdoor temperature is displayed.ġ. Insert the batteries, observing the correct polarity (see marking).ģ. To install and replace the batteries, please follow the steps below:Ģ. The transmitter uses 2 x AA,1.5V batteries. TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER Insert batteries observing the correct polarity (see marking). Insert finger or other solid object in the space at the bottom center of the battery compartment and lift up to remove the cover.Ģ. To install and replace the batteries, please follow the steps below:ġ. The Atomic Clock uses 2 x AA, 1.5V batteries. TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK Remote transmission of outdoor temperature to Temperature Station by 433 MHz signals Outdoor temperature display via 433MHz transmission Weekday display (3 languages to choose from: English, French and Spanish)ĭaylight savings time ON/OFF option (DST) WWVB Radio controlled time with manual time setting By reading this operating manual, the user will however receive a better understanding of the Skyscan Atomic Clock together with the optimum benefit of all its features. Operation of this product is simple and straightforward. Providing WWVB radio-controlled time, date, time zone, indoor and outdoor temperature display, this innovative clock is ideal for home or office use. ![]() Congratulations on purchasing this state-of-the-art Skyscan Atomic Clock as an example of superior design and engineering.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |